JBL Charge 4 Not Charging Try These Fixes
Why is JBL Charge 4 Not Charging and How Do I Fix It?
JBL is a popular brand known for its high-quality Bluetooth speakers. The JBL Charge 4 is one of their most popular portable speakers, loved for its powerful sound, rugged design, and long 20-hour battery life. However, many JBL Charge 4 owners encounter problems with charging their speakers. If your JBL Charge 4 is not charging, don’t worry – this guide will walk you through several troubleshooting tips to fix the issue.
The most common reasons for JBL Charge 4 not charging are an incompatible or faulty charger/cable, a dirty charging port, a drained battery, software bugs, and hardware issues. By methodically trying different chargers, cleaning the ports, resetting the speaker, and checking the battery’s health, you can isolate and fix the underlying problem. Replacing defective parts may be necessary if the issue persists.
Key Takeaways
Incompatible or Faulty Charger/Cable
The most common reason a JBL Charge 4 won’t charge is because of an incompatible or faulty charger or USB cable.
The JBL Charge 4 requires a 5V/2.3A USB charger to function properly. Lower-powered chargers may not provide sufficient electrical current to charge the battery. High-powered chargers like laptops or Quick Charge bricks can also damage the charging circuit.
Be sure to use the original JBL USB-C cable as well. Third-party cables often have poor electrical contacts, preventing effective power transfer.
If you don’t have the JBL accessories, try using a compatible 5V/2A USB charger from another device like a tablet. Also, test different USB-C cables to isolate the fault.
Our Full Review on JBL Charge 4 vs JBL Charge 5 – An In-Depth Speaker Comparison and Review
Dirty Charging Port
Charging issues can also occur if the JBL Charge 4’s charging port contains debris or pocket lint buildup.
Carefully inspect the USB-C port for any visible debris. Use compressed air to spray out any dirt or lint trapped inside.
You can also gently clean with a toothpick or soft-bristle brush if compressed air doesn’t fully clear the port. Just be very careful not to damage the delicate pins inside the port.
Cleaning the charging port will allow for proper electrical contact so your speaker can charge correctly.
Software Bugs and Frozen Devices
The JBL Charge 4 contains an integrated software system that controls all its functions. Sometimes, software bugs and crashes can prevent the speaker from charging properly.
If you’ve ruled out hardware issues, try resetting the JBL Charge 4 speaker to factory default settings. Press and hold the Bluetooth and Volume Up buttons simultaneously until the speaker turns off. This resets the software, clearing any bugs.
Resetting can also “unfreeze” the system if the speaker is unresponsive when connecting the charger.
Faulty or Depleted Battery
As the JBL Charge 4 battery ages after years of use, it slowly loses the capacity to hold a full charge. An old battery that no longer retains charge is the most common hardware reason a JBL Charge 4 won’t charge.
Check the battery health by playing music – a faulty battery will only last for 1-2 minutes before automatically powering off even when fully charged.
If the battery is depleted, replace it by following iFixit’s JBL Charge 4 battery replacement guide. This involves opening up the speaker and swapping in a new battery.
Contact JBL Support
If you still can’t get your JBL Charge 4 to charge after trying the troubleshooting tips above, contact JBL customer support.
JBL may be able to provide further device-specific troubleshooting or warranty/repair options for hardware failures.
Preventing JBL Charge 4 Charging Issues
Here are some tips to keep your JBL Charge 4 charging properly for years:
- Only use the included JBL USB-C cable and 5V/2.3A compatible charger
- Don’t charge below 5°C or above 45°C
- Avoid exposing the speaker to moisture or submerging in water
- Store speaker with 40-50% battery when not using for extended periods
- Replace the battery every 2-3 years or when capacity drops significantly
Following these best practices will minimize wear on the JBL Charge 4’s charging circuit and battery, reducing the likelihood of charging failures over time.
Conclusion
A JBL Charge 4 that won’t charge can be frustrating, but in most cases, it can be fixed with basic troubleshooting steps.
Remember to methodically isolate the issue – test different cables and chargers, clean the hardware ports, reset the software, check the battery’s health, and contact JBL as needed.
With some diligent testing and component replacement, you’ll have your rugged Bluetooth speaker charging properly again in no time.
JBL Charge 4 Not Charging: Extended FAQ
What should I do if my JBL Charge 4 is not charging?
If your JBL charge 4 is not charging, first check the charging cable and adapter to ensure they are working properly. Try using a different charging cable and adapter to see if the issue is resolved. Additionally, make sure to clean the charging port on your JBL Charge 4 speaker as debris or dust may hinder the charging process.
Why is my JBL Charge 4 not charging even when the charging cable is connected?
There could be various reasons why your JBL Charge 4 is not charging. It could be due to battery issues, a faulty battery, or a defective charging port. Try using a different USB-C cable and adapter, and if the issue persists, it may require further troubleshooting to identify the root cause.
How can I fix my JBL Charge 4 if it’s not charging?
If your JBL Charge 4 is not charging, you can try these fixes. Firstly, make sure to fully charge the speaker and then charge the speaker again. It’s also advisable to check for any software bugs or firmware issues by ensuring your device is running the latest software updates. If none of these steps work, you may need to replace the battery or seek professional assistance.
My JBL Charge 4 speaker won’t charge. What’s wrong?
If your JBL Charge 4 speaker won’t charge, it might be a hardware problem with the charging port, or the battery might be defective. Try these fixes such as using a different charger and charging cable to see if the issue is with the original charger. You can also try resetting the speaker by holding down the power button for at least 10 seconds. If none of these solutions works, it’s best to contact JBL customer support for further assistance or take it to a professional repair service.
